Temperature Sensor Cable Thermocouple Compensating and Extension Cable, Resistance Thermometer Cable

It is important in resistance thermometer manufacture and even more so in thermocouple manufacture that the right cable is selected. We always use quality cable in our temperature sensor manufacture and we can supply this cable to you as a separate component. You can buy stock cable on our online store now.

We stock many cables and we are constantly increasing the range. The common options are shown below.

For a specific enquiry contact the office.

Thermocouple Compensating and Extension Cable

We use Class 1 IEC 584-3 thermocouple and extension grade cable, and we can also supply this as intrinsically-safe cable when requested.

Common Sensor Types	K,J,N,T,E, R, S, B
Common Insulation	PVC, Silicon Rubber, PTFE, Glass fibre, Rubber, HT Glass
Common Stranding	1x0.2, 1x0.315, 1x0.5, 7x0.2, 13x0.2, 30 x 0.2,
Options	Heavier Stainless Steel, Silver or Ni Plated. Copper braiding Twisted Pairs 4 core duplex, 6 core triplex and multicore

Resistance Thermometer (RTD) Cable

Our resistance thermometer cables comply with IEC 751: Colour coding unless stated otherwise. You can see the types of resistance thermometer cable we use and supply below.

Wiring	2, 3, and 4 wire versions + multicore
Common Insulation	PVC, Silicon Rubber, PTFE, Glass fibre, Tefzel, FEP
Common Stranding	7x0.2, 13 x 0.2, Stainless Steel, Silver or Ni Plated
Options	Copper braiding Twisted Pairs